Automatic Gate Access Device

Safety Wired Photocell Infrared Sensor For Automatic Doors And Gate Openers Safety Wired Photocell Infrared Sensor For Automatic Doors And Gate Openers D escription: Safety wired photocell infrared sensor for automatic doors and gate openers with range up to 20m Product Features Power supply 12-24 Vca-Vdc Range up to 20 mt in all environments Protection against interference Anti-blinding circuit for protection from sunlight Protection against environmental factors IP 55 Basic Parameter  of  IR-20M Safety Wired Photocell Infrared Sensor For Automatic Doors And Gate Openers : Product Name: Active Infrared Detector  Power Supply:12/24VAC/DC Detecting Distance:with 20m stable detection distance Max.Range Up:20Meters(Indoor or Outdoor) Operate Temperature:-10degree-60 degree Max.TX working Current:25mA Max.RX working Current:35mA Max.Relay Contract:Max 500mA e 48Vac/dc IP rate:IP65 Cover Material:Anti-UV Material Can working at outside directly; Face to sunlight

20m Outdoor IP55 Beam Infrared Detector/Photo IR Beam Sensor with door used/Alarm system Install each pair at the opposite positions.Then there is a infrared area between these two detector parts. When someone passes the infrared region, the detector will send alarm signal to the security alarm host (which not included here). Install Distance(Max.)in the above chart means the maximum install distance between the twodetector parts. Great to be installed for security system in school, office building, hosipital, home yard, etc. Detecting range can be reduced to 30% in bad weather conditions, like rain, dust, etc. English Usage Manual included in the pack. It will give you detailed instructions Single Beam Infrared Sensor   Sealed design to anti-rain (fog), dust (worms) and other integrated weather, the detector sensitivity will increase automatically(AGC circuit)    With high levels of anti-RFI / EMI capability  High-power transmitter, sensitivity surplus degree up to 90% 

Vehicle Loop Detector Installation Guide   Feature It has excellent corrosion resistance oil resistance,strong acid,strong alkali resistant to high voltage. Small loss at high frequency, no moisture absorption, insulation resistance; It has excellent flame resistance, aging resistance, long service life. Anti-corrosion, anti-combustion, perfect insulation,  Acid-Alkaline resistant JUTAI Loop Wire Specification Model: JTHT-11 Size: 0.5m*2 Temperature: -65℃ to +200℃ One Roll Length: 305m Material: Silicone rubber and standed silver plated copper wire Color: Red and Black     1. The detector should be installed in a waterproof housing as close to the loop as possible. 2. The loop and feeder should be made from insulated copper wire with a minimum cross-sectional area of 1.5mm2. The feeder should be twisted with at least 20 turns per metre. Joints in the wire are not recommended and must be soldered and made waterproof. Faulty joints could lead to incorrect o