20m Outdoor IP55 Beam Infrared Detector/Photo IR Beam Sensor with door used/Alarm system

20m Outdoor IP55 Beam Infrared Detector/Photo IR Beam Sensor with door used/Alarm system

  • Install each pair at the opposite positions.Then there is a infrared area between these two detector parts. When someone passes the infrared region, the detector will send alarm signal to the security alarm host (which not included here).
  • Install Distance(Max.)in the above chart means the maximum install distance between the twodetector parts.
  • Great to be installed for security system in school, office building, hosipital, home yard, etc.
  • Detecting range can be reduced to 30% in bad weather conditions, like rain, dust, etc.
  • English Usage Manual included in the pack. It will give you detailed instructions
  • Single Beam Infrared Sensor 
  •  Sealed design to anti-rain (fog), dust (worms) and other integrated weather, the detector sensitivity will increase automatically(AGC circuit)  
  • With high levels of anti-RFI / EMI capability 
  • High-power transmitter, sensitivity surplus degree up to 90% 
  • High-power infrared receiver tube, low-power process technology 
  • Adjustable of beam interdiction period, to make it more flexible and adaptable 
  • Professional anti-jamming optical housing

    20m Outdoor IP55 Beam Infrared Detector/Photo IR Beam Sensor with door used/Alarm system Parameter:
    Products Name: CE FCC Rohs Certified 20m Outdoor IP55 Beam Infrared Detector/Photo IR Beam Sensor with door used/Alarm system 
    Power Supply:12/24VAV/DC
    Detection Distance:With 20m Stable Detection Distance
    Operate Temperature:-10degree to 60 degree
    Max TX Working Current:25mA
    Max RX Working Current:35mA
    Max Relay Contract:Max.Range Up:20Meters(Indoor or Outdoor)
    IP Rate:IP65
    Cover Material:Anti-UV material
    Can Working At Outside Directly
    Face To Sunlight, Distance Not Reduce
    OEM/ODM:OEM/ODM Service Offered
    Warranty Life:24 Month
    Color:Black Housing
    Material:Plastic
    Net Weight:160g

评论

发表评论

此博客中的热门博文

loop installation guide

图片
Loop Installation Guide 1. The detector should be installed in a waterproof housing as close to the loop as possible. 2. The loop and feeder should be made from insulated copper wire with a minimum cross-sectional area of  1.5mm2 . The feeder should be twisted with at least 20 turns per metre. Joints in the wire are not  recommended and must be soldered and made waterproof. Faulty joints could lead to incorrect operation of  the detector. Feeders which may pick up electrical noise should use screened cable, with the screen earthed  at the detector. 3. The loop should be either square or rectangular in shape with a minimum distance of 1 metre between  opposite sides. Normally 3 turns of wire are used in the loop. Large loops with a circumference of greater than  10 metres should use 2 turns while small loops with a circumference of less than 6 metres should use 4 turns.  When two loops are used in close proximity to each other it is recommended that 3 tu
阅读全文

How to use vehicle loop detector/loop sensor/ car park loop detector? How to install loop detector? There are loop detector user manual for your reference.

图片
Compact Size: the compact and well engineered housing Combines all of the industry requirements regarding features and functionality and allows this detector to be Incorporated into any or existing traffic detection system. Diagnostic Capabilities : Comprehensive diagnostics Capabilities allow for accurate diagnosis of loop and Installation problems.  Selectable Presence Time: The output of the presence Relay can be selected to limit a detect output to a fixed time(time>30 minutes)while a vehicle remains on the loop  Loop Frequency Indication: Interference between adjacent loop/detectors can be determined by an integral indication, and eliminated by changing the frequency setting.  Two separate output relays: Presence Relay A is presence output. Can be extended for 0,2,5,8,10,15,20 or 30 seconds, programmable with external 10 way DIP switches. Pulse Relay B, programmable with external 10 way DIP switches, provides presence, pulse on entry, pulse on exit, or fail
阅读全文

Parking control,RFID Access Control,Passive tags.

图片
RFID Tag Spec.: Work frequency:2.45GHz&13.56MHz Or 2.45GHz&125KHz  Work life:>6 years (battery not be replaced ) Microwave COM check: CRC2032cyclic redundancy check Receiving sensitivity :-80 dbm ～ -90 dbm Work current:<4UA Alrm under low power Key function :help function match reader help/open/close  IP CODE:IP54 Power failure save :>10 years
阅读全文