Middle range/long range reader ( AR200U WAIVE & DRIVE SYSTEM ,GP-90 proximity reader,GP-99 long range reader)

Middle range/long range reader 


GP-99 is a mid range reader for parking card access system that can penetrate most solar film in market to offer affordable mid range reading without winding down windows. User can comfortably flash their card from inside the car. GP99 uses passive RFID long range card and is compatible with most vehicle car park access control system.
Gp99 help automate and secure your guard house parking card access. Now you can go home feeling safer while enjoying the convenient offered by our advance RFID mid range technology. Ideal solution for budget residential or commercial premise.



-Reading Range 0.9 to 1.3 meter
-No Stop your car to flash card from side mirror
-No need to wind down car windows
-Uses passive long range


Feature:

  • Can penetrate solar film (V-Kool)
  • Firmware upgradable in the field
  • Auto tuning function to compensate presence of metal and interference
  • Extended reading range from 90 cm to 130 cm.
  • Bright LED indicators, tuning LED bar
  • Attractive and weatherproof housing design
  • High-quality power supply with noise filter included 
E-mail: sales9@jutairfid.com
Whatsapp: 008615992504234
Skype: jutai.sales3
Contact: Mandy Chan

www.jutairfid.com
Facebook: https://www.facebook.com/shaw.jake.31

评论

发表评论

此博客中的热门博文

loop installation guide

图片
Loop Installation Guide 1. The detector should be installed in a waterproof housing as close to the loop as possible. 2. The loop and feeder should be made from insulated copper wire with a minimum cross-sectional area of  1.5mm2 . The feeder should be twisted with at least 20 turns per metre. Joints in the wire are not  recommended and must be soldered and made waterproof. Faulty joints could lead to incorrect operation of  the detector. Feeders which may pick up electrical noise should use screened cable, with the screen earthed  at the detector. 3. The loop should be either square or rectangular in shape with a minimum distance of 1 metre between  opposite sides. Normally 3 turns of wire are used in the loop. Large loops with a circumference of greater than  10 metres should use 2 turns while small loops with a circumference of less than 6 metres should use 4 turns.  When two loops are used in close proximity to each other it is recommended that 3 tu
阅读全文

How to use vehicle loop detector/loop sensor/ car park loop detector? How to install loop detector? There are loop detector user manual for your reference.

图片
Compact Size: the compact and well engineered housing Combines all of the industry requirements regarding features and functionality and allows this detector to be Incorporated into any or existing traffic detection system. Diagnostic Capabilities : Comprehensive diagnostics Capabilities allow for accurate diagnosis of loop and Installation problems.  Selectable Presence Time: The output of the presence Relay can be selected to limit a detect output to a fixed time(time>30 minutes)while a vehicle remains on the loop  Loop Frequency Indication: Interference between adjacent loop/detectors can be determined by an integral indication, and eliminated by changing the frequency setting.  Two separate output relays: Presence Relay A is presence output. Can be extended for 0,2,5,8,10,15,20 or 30 seconds, programmable with external 10 way DIP switches. Pulse Relay B, programmable with external 10 way DIP switches, provides presence, pulse on entry, pulse on exit, or fail
阅读全文

Parking control,RFID Access Control,Passive tags.

图片
RFID Tag Spec.: Work frequency:2.45GHz&13.56MHz Or 2.45GHz&125KHz  Work life:>6 years (battery not be replaced ) Microwave COM check: CRC2032cyclic redundancy check Receiving sensitivity :-80 dbm ～ -90 dbm Work current:<4UA Alrm under low power Key function :help function match reader help/open/close  IP CODE:IP54 Power failure save :>10 years
阅读全文