UHF passive long range RFID barrier gate management system



JUTAI as barrier gate system supplier, we deal in boom barrier gate, vehicle loop detectors, infrared photocell beam sensors, UHF long range reader...

Whole kit RFID barrier gate system includes:
  • 2units boom barrier gates

  • 2units UHF long range readers

  • UHF cards/stickers

  • 1units access control board( support two doors)

  • loop detectors/ infrared beam sensors

  • JUTAI access control software managemnet



Email: jutaisales1@gmail.com  sales9@jutairfid.com
WhatsApp/Wechat: 0086 1599 250 4234
Skype: MandyChan0515

评论

发表评论

此博客中的热门博文

loop installation guide

图片
Loop Installation Guide 1. The detector should be installed in a waterproof housing as close to the loop as possible. 2. The loop and feeder should be made from insulated copper wire with a minimum cross-sectional area of  1.5mm2 . The feeder should be twisted with at least 20 turns per metre. Joints in the wire are not  recommended and must be soldered and made waterproof. Faulty joints could lead to incorrect operation of  the detector. Feeders which may pick up electrical noise should use screened cable, with the screen earthed  at the detector. 3. The loop should be either square or rectangular in shape with a minimum distance of 1 metre between  opposite sides. Normally 3 turns of wire are used in the loop. Large loops with a circumference of greater than  10 metres should use 2 turns while small loops with a circumference of less than 6 metres should use 4 turns.  When two loops are used in close proximity to each other it is recommended that 3 tu
阅读全文

How to use vehicle loop detector/loop sensor/ car park loop detector? How to install loop detector? There are loop detector user manual for your reference.

图片
Compact Size: the compact and well engineered housing Combines all of the industry requirements regarding features and functionality and allows this detector to be Incorporated into any or existing traffic detection system. Diagnostic Capabilities : Comprehensive diagnostics Capabilities allow for accurate diagnosis of loop and Installation problems.  Selectable Presence Time: The output of the presence Relay can be selected to limit a detect output to a fixed time(time>30 minutes)while a vehicle remains on the loop  Loop Frequency Indication: Interference between adjacent loop/detectors can be determined by an integral indication, and eliminated by changing the frequency setting.  Two separate output relays: Presence Relay A is presence output. Can be extended for 0,2,5,8,10,15,20 or 30 seconds, programmable with external 10 way DIP switches. Pulse Relay B, programmable with external 10 way DIP switches, provides presence, pulse on entry, pulse on exit, or fail
阅读全文

Parking control,RFID Access Control,Passive tags.

图片
RFID Tag Spec.: Work frequency:2.45GHz&13.56MHz Or 2.45GHz&125KHz  Work life:>6 years (battery not be replaced ) Microwave COM check: CRC2032cyclic redundancy check Receiving sensitivity :-80 dbm ～ -90 dbm Work current:<4UA Alrm under low power Key function :help function match reader help/open/close  IP CODE:IP54 Power failure save :>10 years
阅读全文