Parking Auto payment system parking management system

High quality automatic car parking system autopay machine




Automatic pay station, or can also be called Auto pay station, pay on foot station, or pay and display machine, is set up on the way to parking lot exit or other proper location.
  • It offers self-service of parking fee collection to drivers.
  • It also provides automatic, humanized and safety management to the parking lot
Immediately after drivers swipe the parking card or scan the barcode ticket in the automatic pay station, the screen of the station will display parking information and parking fee. The system will guide drivers to complete the payment process interactively by LED screen and voice messages.

More detail or inquiry please email to jutaisales1@gmail.com
WhatsApp: 0086-1599-250-4234
Skype: MandyChan0515


评论

发表评论

此博客中的热门博文

loop installation guide

图片
Loop Installation Guide 1. The detector should be installed in a waterproof housing as close to the loop as possible. 2. The loop and feeder should be made from insulated copper wire with a minimum cross-sectional area of  1.5mm2 . The feeder should be twisted with at least 20 turns per metre. Joints in the wire are not  recommended and must be soldered and made waterproof. Faulty joints could lead to incorrect operation of  the detector. Feeders which may pick up electrical noise should use screened cable, with the screen earthed  at the detector. 3. The loop should be either square or rectangular in shape with a minimum distance of 1 metre between  opposite sides. Normally 3 turns of wire are used in the loop. Large loops with a circumference of greater than  10 metres should use 2 turns while small loops with a circumference of less than 6 metres should use 4 turns.  When two loops are used in close proximity to each other it is recommended that 3 tu
阅读全文

How to use vehicle loop detector/loop sensor/ car park loop detector? How to install loop detector? There are loop detector user manual for your reference.

图片
Compact Size: the compact and well engineered housing Combines all of the industry requirements regarding features and functionality and allows this detector to be Incorporated into any or existing traffic detection system. Diagnostic Capabilities : Comprehensive diagnostics Capabilities allow for accurate diagnosis of loop and Installation problems.  Selectable Presence Time: The output of the presence Relay can be selected to limit a detect output to a fixed time(time>30 minutes)while a vehicle remains on the loop  Loop Frequency Indication: Interference between adjacent loop/detectors can be determined by an integral indication, and eliminated by changing the frequency setting.  Two separate output relays: Presence Relay A is presence output. Can be extended for 0,2,5,8,10,15,20 or 30 seconds, programmable with external 10 way DIP switches. Pulse Relay B, programmable with external 10 way DIP switches, provides presence, pulse on entry, pulse on exit, or fail
阅读全文

Parking control,RFID Access Control,Passive tags.

图片
RFID Tag Spec.: Work frequency:2.45GHz&13.56MHz Or 2.45GHz&125KHz  Work life:>6 years (battery not be replaced ) Microwave COM check: CRC2032cyclic redundancy check Receiving sensitivity :-80 dbm ～ -90 dbm Work current:<4UA Alrm under low power Key function :help function match reader help/open/close  IP CODE:IP54 Power failure save :>10 years
阅读全文